How To Install A Zmodo Camera

zmodo HD WIFi Indoor/ Outdoor Camera Kit User Guide

Mobile Setup

This quick start guide will help you configure your WiFi camera kit for initial utilize. Before performing any permanent installation, nosotros recommend that you complete the mobile setup in Section 1 to connect your cameras and make sure that nothing was damaged during aircraft.

Before you begin:

• Plug in and power on all cameras near your router for initial setup. Fasten the antennas (if applicable) onto the cameras.
• Make sure that you have a potent WiFi connexion at the location of your cameras.
• Make sure you know the SSID (WiFi network name) and password of the ii.4GHz WPA-PSK/WPA2-PSK WiFi network that you desire your cameras to connect to. Your
  network cannot exist hidden.
• Make sure your network has at least 1Mbps upload speed for each camera when live viewing or 2Mbps upload speed for each camera when using the cloud service.
• Download and install the "Zmodo" app from Google Play or the App StoreTM (compatibility: iOS 9.0+ or Android TM 4.0+). Launch the app and sign up for a free Zmodo
  account. All of your devices will exist bound to this account.
  

Nosotros are constantly working to improve our product and app. Delight visit
www.zmodo.com/support for updated instructions, manuals, and more.

1. Log in and press the Add Device option in the upper right corner of the Home Page.
   
2. Select the "QR Code" connexion method to connect your device(s). Your device(s) will be added to your Zmodo account.
   You tin can follow the in-app instructions or refer to steps 3-nine to consummate setup.
   
3. Power on your device(s). The status light volition blink light-green when the device has powered on. Tap "Next" to proceed.
   
4. Turn up the book on your phone for voice prompts during the mobile setup process. Tap "Side by side" to continue.
   
5. Connect your telephone to the two.4GHz WPA-PSK/WPA2-PSK WiFi network that yous want your device(s) to connect to
   (network cannot be subconscious). Tap "Adjacent" to proceed.
   
6. Enter the password of the WiFi that y'all want your device(s) to connect to. Please make sure that your WiFi password is correct. Tap "Next" to continue.
   
   Annotation: The WiFi password is case-sensitive.
7. Steadily agree your telephone's display in front of your Zmodo camera until you lot hear "Device continued". The distance between your telephone and the camera should be about viii inches.
   
8. Proper noun your device(due south) and set a password for it. Tap "Next" to go on.
   
   Note:  The password provides an additional layer of security for your devices. You will not demand to use this password when accessing your devices from
   the Zmodo app. It is not required, but it is highly recommended.
9. Your device(s) have been successfully configured! Tap "Done" to finish. You tin now share or view your device(s).
   

Mounting Your Cameras

Installation Requirements & Tips:

• If you're installing your cameras outdoors, all wired connections must be weatherproofed.
  
• Before installing the cameras, carefully programme where and how they will be positioned, and how you lot will route the wiring that connects your cameras to the power adapters.
• Try to avoid WiFi signal interference from concrete, cement, and metal equally much as possible. Do not place cameras in a location where these materials stand up
  betwixt your cameras and your WiFi router.
• Brand sure that your cameras are within range of your WiFi network, and that your network meets all of the bandwidth requirements from Section 1.
• If you accept a lot of obstacles betwixt your photographic camera and the WiFi router, the transmission range will be greatly reduced. In order to increment the range, y'all may buy a WiFi range extender to place near the cameras.

1. Unplug the cameras that have been configured in Section 1.
2. Line the camera bracket against the wall where yous would similar to install the cameras, and mark the appropriate holes. Drill three holes slightly smaller than the wall anchors and use a hammer to gently insert the anchors into the wall. Fasten the three screws through the holes on the bracket and into the anchors as shown.
   Annotation: Depending on the photographic camera model that you purchased, the photographic camera subclass may or may not be attached onto the camera when get-go removed from factory packaging.
   
               (epitome may vary for your specific camera model)
3. Fasten the bracket to the photographic camera. You will exist able to adjust the camera position using the adjustable camera bracket. Position the camera for an optimal viewing angle, and tighten the bracket.
   
                 (paradigm may vary for your specific photographic camera model)
4. Connect the supplied power adapter to the power port on the photographic camera, and plug the adapter into a nearby power outlet. Repeat steps 1-4 for all cameras in your
   camera kit.
   
            (image may vary for your specific camera model)

Recording and Viewing Options

Recording Options
This device is compatible with the cloud service. Please visit www.zmodo.com/support for more information and articles. The cloud service will let yous to:

• Record continuously and store footage on our secure deject servers.
• Create and save video clips from your recordings.
• Admission your footage and clips at whatsoever time from any location.
• Relish more smart features in the future!

Viewing Options

All of your Zmodo devices volition be bound to your Zmodo user account. You can access your camera and other TM devices by using the Zmodo app with any Android or
iOS device. Just download the Zmodo app from TM TM Google Play or the App Store .

You can besides admission your devices from any spider web browser with our web app. Visit user.zmodo.com and log in withyour Zmodo user account information.

Status Low-cal Definitions

Your camera has an LED light that indicates the status of the camera. Delight refer to the guide beneath:

Solid light-green
The camera is powering on.

Blinking green
The camera is gear up for setup.

Blinking blue
The camera is connecting to the WiFi network. Please do
NOT turn off or unplug your camera at this time.

Solid blueish
The photographic camera has successfully connected to the WiFi network.

Troubleshooting

If yous were unable to connect your camera successfully:

• Make certain that y'all are connecting to a 2.4GHz WPAPSK/ WPA2-PSK WiFi network, and your network is not subconscious.
• Please make sure that you entered the network name and countersign correctly. Notation: Both are example-sensitive.
• During the QR lawmaking scan, please make certain that your phone's brandish brightness is high, and avoid glare on your phone's display.
• Please brand sure that your camera is not already bound to another user account.
• Brand sure that you have attached the antenna (if applicable) onto your photographic camera, and try moving your photographic camera closer to the router for the initial setup.
  (Setting upwardly multiple cameras) If you were able to connect some, just not all of your cameras:
• Power bike the camera(south) that are not connected to the WiFi and echo the setup procedure.

Note: You can check the status calorie-free of the device to see if it has been successfully continued to the WiFi or non. If the status calorie-free is blinking green, it means that it has non connected to a WiFi network. If it is solid blue, it means that it is already continued to the WiFi network.

Support

Having difficulty?

Yous can use the Live Chat function in the Zmodo app if you have any technical problems. Please follow the steps below: Admission the "Me" page in the lower right corner in
Zmodo app and select "Zmodo Support". For more instructions, troubleshooting, support, and other resource, delight visit: www.zmodo.com/support

Like us on Facebook.com/Zmodo

Follow us on Twitter @Zmodo

Android is a trademark of Google Inc. Google Play is a trademark of Google Inc. Apple, the Apple Logo, and iPhone are trademarks of Apple tree Inc., registered in the U.South. and other countries. App Store is a service marker of Apple Inc.

Read More About This Manual & Download PDF:

Documents / Resources

References

Source: https://manuals.plus/zmodo/hd-wifi-indoor-outdoor-camera-kit-manual

Posted by: linthoom1978.blogspot.com

Share this post